Kuppersbusch KD 674.1GE Instrucciones De Uso Y De Montaje página 19

3 - Fitting the hood canopy C to the wall
a) Remove the metal grease filters and the
activated charcoal filter, if there is any (see
the paragraph on Maintenance).
b) Fit the support rod B using the two screws
K (3,5x9,5) provided (fig. 8).
c) Hook the hood canopy C to the eye bolts
O fixed in holes 1 (fig. 9).
d) Adjust the support rod B so that it pushes
against the wall (fig. 10).
e) Adjusting position (fig. 11). There are two adjustable hooks at the rear of the hood,
which can be used to adjust its position as follows:
- Turn the screws L until the position of screws N coincides with the lower access
holes.
- Turn the screws N to adjust the vertical and horizontal position of the hood.
- Lock the screws L to fasten the hood against the wall.
- Insert the plugs T provided in the holes giving access to screws N.
B
A08_10
1 0
1 0
Part 1 - INSTALLATION INSTRUCTIONS
9
9
1 1
1 1
8
8
19