TruTalk TK14 Manual Del Usuario página 14

USING YOUR RADIO, Continued
Main Channel Scanning, Continued
detected. To reply to the incoming message, press
the P-T-T button once, then hold down the P-T-T
button while speaking into the microphone. To remain
on the active channel, and stop scanning, press the
P-T-T again or the Call button. The radio scan
sequence will stop on the current channel. (If you
wish to return to another channel, follow instructions
for Selecting a Channel). If you wish to re-activate
scan, repeat the steps above.
PrivateTalk CTCSS Sub-Channel Scanning - To
provide a quick search for sub-channel activity (from
a single main channel), press the MODE button until
the small sub-channel numbers along with the icon
word "SCAN" flashes. Press and release the UP (!)
button. The radio will begin to scan the sub-channels.
The radio will continue to scan until it detects an
incoming transmission. Press the P-T-T once, then
hold down the P-T-T and speak into the radio micro-
phone. Press the P-T-T or Call button to stop the
scan sequence.
Beep Tone (ON / OFF) - You may set an audible tone
to occur when any button (except Call and the P-T-T)
is pushed. To activate, press the MODE button until
the icon word "BEEP" flashes in upper right corner of
13