WOOD'S HSW100 Manual Del Usuario página 3

Manual HSW100 Humidifier
Content Eng
•
Getting started
•
Cleaning
•
Safety
•
Problem solving
•
Technical data
Getting started
•
Connect the supplied AC adapter
•
Connect the unit to an electrical outlet
•
Ensure that the humidifier is stable and in balance
by adjusting the feet as needed. Otherwise, there
is a risk that the water will run out.
•
Turn on the unit and select fan speed by turning
the slider clockwise on the side of the unit.
•
The green "Power" indicator lights to indicate that
the product is turned on and starts working.
•
A higher fan speed means a higher humidification,
but also a slightly higher energy consumption and
noise level.
•
The red water indicator lights up when the water
level is low and water needs replenishing.
•
Filling is done by opening the filler cap and gently
pouring water into it.
•
When the red water indicator flashes, the tank is
full and no more water should be added.
•
The water indicator is off when the water level is
sufficient.
•
Water shall be replenished when the red water
indicator is lit solid.
•
Komma igång Important! Avoid adding water before the lamp
comes on, as there is a risk of overfilling due to.
that the level sensor has not been reset.