D-Link DGS-1016D Guía De Instalación Rápida página 2

Check Your Package Contents
These are the items included with your DGS-1016D / DGS-1024D purchase:
DGS-1016D /
DGS-1024D
Notice Before Setup the DGS-1016D / DGS-1024D
The setup of the Switch can be performed using the following steps:
Install the DGS-1016D / DGS-1024D in a fairly cool and dry place. See Technical
A.
Specifications for the acceptable operation temperature and humidity ranges.
Install the Switch in a site free from strong electromagnetic source, vibration, dust, and
B.
direct sunlight.
C. Leave at least 10cm of space at the left and right hand side of the Switch for ventilation
Visually inspect the power cable and ensure that it is firmly inserted into a suitable power
D.
outlet.
Installation
Desktop or Shelf Installation
When installing the Switch on a desktop
or shelf, the rubber feet included with the
device must be first attached. Attach
these cushioning feet on the bottom at
each corner of the device. Allow enough
ventilation space between the device
and the objects around it.
Quick Installation Guide
DGS-1016D / DGS-1024D
16 / 24-Port Gigabit Desktop Switch
Quick Installation
Guide
Power Cord
The Switch can be mounted in an EIA standard size, 19-inch
rack, which can be placed in a wiring closet with other
equipment. To install, attach the mounting brackets on the
switch's front panel (one on each side) and secure them with
the screws provided.
Then, use the screws provided with the equipment rack to
mount the Switch in the rack.
1
Rack-mount
bracket
Rack Installation
.