USER SETTINGS
Only menu items followed by a greater-than symbol (>) may be adjusted. If no keys are selected for 5 minutes on screens: INLET OUT-
LET, GRAIN DPR, the display will return to normal display mode. In all the other menu items, the display with return to the normal dis-
play mode after 20 seconds. Items without the symbol (>) are for information only and cannot be changed or reset.
Press DISPLAY
MENU to proceed to
the next menu item. ↓
1. JOB HRS RESET >
>
PWR INTERRUPT X
2. INLET OUTLET
For information only.
100' 80% 115' 30%
3. GRAIN DPR
( XX.X g/kg for 230V models )
XX GPP
4. FILTER CHECKED
>
XXX HRS >
5. COIL CLEANED
>
XXX HRS >
6. HUMIDISTAT
>
MODE OFF >
7. HUMIDISTAT
>
SETPOINT XX% >
8. LANGUAGE
>
ENGLISH >
9. TEMP UNITS
>
'F >
10. COIL TEMP
For information only.
XX'
11. COMP CURRENT
For information only.
XX.X A
12. FIRMWARE
For information only.
3.0X FXXX-XXX
13. LIFE HOURS
XXXX HRS
(Returns to
top menu item.)
The following section available only on wireless-equipped units.
14. SENSOR ID
XXXXXXXX
(Returns to
top menu item.)
BEFORE STORAGE OR TRANSPORT
To reduce the possibility of drips when moving the
unit, follow these additional steps to ensure that all
water is removed from the unit.
NOTICE: To ensure all water is removed from the dehu-
midifier, the unit will complete the defrost cycle even if
the unit is turned off. If the unit is unplugged during the
07-02331B EB80
Press
MENU SELECTION to change the setting.
1. JOB HR RESET 0
Press > to reset to 0.
PWR INTERRUPT 0
5. FILTER CHECKED
Press > to clear filter hours.
0 HRS
5. COIL CLEANED
Press > to clear coil hours.
0 HRS
6. HUMIDISTAT
Press > to turn ON or OFF.
MODE ON >
Press > to cycle through 40%–90% at 5% increments (default is 50%). For maximum dehumidification,
make sure HUMIDISTAT is OFF.
8. IDIOMA
>
ESPANOL >
9. TEMP UNITS
Press > to change to °F or °C.
'C >
→
8. SPRACHE
>
DEUTSCH >
FRANCAIS >
defrost cycle, excessive water may accumulate in the
unit and may drip out when you move the unit.
NOTICE: To ensure the condensate tank empties com-
pletely while purging, make sure the unit is placed up-
right on a horizontal surface.
4
8. LANGUE
Press > to change lan-
guage options.
EnviroBoss.