Elvox RS16 Manual Para El Conexionado Y El Uso página 20

ACTO
4.5.3 Connecting photocells with photo-test function active
If the photo-test function is activated (the control unit checks the operation of the photocells, see dip switch 8), respect the following connection (each time
the motor starts the control unit cuts off and restores power to the transmitter of the photocell to check their operation). N.B.: If you connect a switch edge to
the PHO input, you cannot activate the photo-test function
4.7 - Stop button connection
Stop button connection, normally closed contact, opening the contact causes the gate to stop and suspends the automatic closing time (when the button is
not engaged, the STP LED should be lit), if not used then jumper between COM and STP
ANTShield
18
15 16
9 10 11 12 13 14
+ PHT
+24 Vdc
-
COM
PHC
PHO
internal photocell
COM
PHO
+24 Vdc
-
+PHT
9 10 11 12 13 14
RX1 RX2
+
-
NO COM NC
NO COM NC
9 10 11 12 13 14
as
+
- +
-
NO COM NC
9 10 11 12 13 14
Normally closed button
TX1 TX2
+
-
+
- -
RX1
+
-
NO COM NC
NO COM NC
+ PHT
+24 Vdc
-
COM
PHC
+
-
NO COM NC
COM
PHO
+24 Vdc
-
+PHT
+
RX2
TX1
+
-
+
-
+
-
Fig. 11
Fig. 12
EN