Descargar Imprimir esta página

Safety Information; Risk Of Electric Shock - Liberty Pumps 442 Serie Manual De Instalación

Sistema de respaldo de batería
Ocultar thumbs Ver también para 442 Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Safety Information

ALWAYS disconnect BOTH the primary and backup pumps from their power sources before handling or making any adjust-
ments to either pump.
Only qualified personnel should complete fixed wiring, battery and electrical connections, according to all local and national
electrical codes, during a pump installation.
After installation, be certain that the pump is properly grounded, using its supplied grounding conductor. Use with a Ground
Fault Circuit Interrupter (GFCI) is highly recommended, even in areas where GFCI use is not mandated by code.
During flood conditions, submerged electrical connections (including batteries) can energize the water. Always wear dielectric
rubber boots and other applicable Personal Protective Equipment (PPE) when water is on the floor and you must service an en-
ergized pump. DO NOT ENTER THE WATER if the water level is higher than that of the protection your PPE offers or if your
PPE is not watertight.
NEVER lift or carry a pump by its power cord. This will damage the power cord, and could expose the electrically live wires
inside the power cord.
DO NOT bypass grounding wires.
The electrical power supply shall be located within the length limitations of the pump power cord, and for below grade installa-
tions it shall be at least 1.22 m (4 feet) above floor level.
NEVER use this product in applications where human contact with the pumped fluid is common (such as swimming pools,
fountains, marine areas, etc.).
This safety alert symbol in your manual and on the pump is intended to alert you to a
potential risk for injury or death.
This is a safety alert symbol identifying risk of electric shock. It will be accompanied
with an instruction intended to minimize your potential risk of electric shock.
This is a safety alert symbol identifying risk of fire. It will be accompanied with an in-
struction intended to minimize your potential risk of fire.
This is a safety alert symbol identifying risk of injury or death. It will be accompanied
with an instruction intended to minimize your potential risk of injury or death.
Warns of hazards that will cause serious injury or death.
Warns of hazards that can or will cause minor or moderate injury.
Warns of hazards that can cause personal injury, death, or property damage.
Signals an important instruction related to the pump. Failure to follow these instructions
could result in pump component failure, or improper operation of the unit, possibly re-
sulting in property damage .

RISK OF ELECTRIC SHOCK

electrically live parts, items, fluid, or water can cause serious in-
jury or death.
©Copyright 2016 Liberty Pumps Inc. All rights reserved.
- Accidental contact with
2

Publicidad

loading

Este manual también es adecuado para:

442-10a442-10a-eye442-25a442-25a-eye