Selecting Preset Sound Modes - JVC KW-XC777 Manual De Instrucciones

Selecting preset sound modes

You can select a preset sound adjustment
suitable to the music genre.
1
Select "EQ."
Canceled
2
Select the sound mode.
FLAT Hard Rock
POP JAZZ
Country Raggae
USER** (back to the beginning)
* Rhythm and Blues
** If you want to adjust and store your original
sound mode (USER), see "Storing your own
sound adjustments" on page 20.
EQ level changes as you select the sound
mode.
Ex.: When you select "R & B"
To cancel the sound mode, select "FLAT" in
step 2.
Note:
You can adjust the sound mode to your preference, and
store it in memory.
EQ
S.BASS
L.V.METER
The sound mode
changes as follows:
R & B*
DanceMusic
Classic
To store a sound mode separately for each
playback source (EQ Link)
Once you select a sound mode, it is stored in
memory. It will be recalled every time you select
the same source. A sound mode can be stored for
each of the following sources — FM1, FM2, FM3,
AM, CD, tape, external components and the EX
(extra) button (see page 10).
• See also "Changing general settings (PSM)" on
page 22.
1
Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
Press ¢ or 4
2
(Equalization Link)."
3
Press + to select "LINK ON."
4 Press SEL (select) to finish the setting.
To cancel EQ Link, repeat the same procedure
and select "LINK OFF" by pressing – in step 3.
• When "EQ LINK" is set to "LINK ON"
The selected sound mode and Super Bass
level can be stored in memory for the current
source.
Each time you select the same source, the
same sound mode is also recalled, and shown
after the source name.
• When "EQ LINK" is set to "LINK OFF"
The selected sound mode effect applies to all
the sources selected.
to select "EQ LINK
19