Storing Stations In Memory; Automatic Preset: Ssm; Manual Preset - JVC KW-XC777 Manual De Instrucciones

Storing stations in memory

You can use one of the following methods to
store broadcasting stations in memory.
• Automatic preset: SSM (Strong-station
Sequential Memory)

• Manual preset

• Storing your favorite station in to the EX button

Automatic preset: SSM

You can preset 6 local stations in each FM band
(FM1, FM2, and FM3).
1
Select the band (FM1, FM2, or FM3).
FM1
2
Press MODE repeatedly until "SSM"
appears.
3
Press SEL.
"--SSM--" appears, then disappears when
automatic preset is over.
Local stations with the strongest signals are
searched and stored automatically in the band you
have selected (FM1, FM2, and FM3). These stations
are preset in the number buttons — No. 1 (lowest
frequency) to No. 6 (highest frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.
FM2 FM3 AM
Manual preset
You can preset up to 6 stations in each band
(FM1, FM2, FM3, and AM) manually.
EXAMPLE: Storing an FM station of 88.3 MHz
into the preset channel number 1 of
the FM1 band
1
Select the FM1 band.
2
Tune in to a station (in this example,
of 88.3 MHz).
3
Press and hold the number button
(in this example, 1) for more than 2
seconds.
"P1" flashes for a few seconds.
4
Repeat the above procedure to store
other stations into other preset
numbers.
Press ¢
to tune in
to stations of higher
frequencies.
Press 4
to tune in
to stations of lower
frequencies.
9