Safety; What To Do In Case Of An Emergency; Intended Use Of The Machine; Staff Requirements - Gebhardt Anlagentechnik TD13 Manual De Uso

2

Safety

2.1

What to do in case of an emergency

The machine must be switched off immediately using the master switch in the case of an
emergency.
2.2

Intended use of the machine

The turbo steamer is used to sterilise winery equipment. Any other applications are to be checked
with the manufacturer before use. Only working and auxiliary materials checked with the
manufacturer must be used with the turbo steamer. Written approval must be given by the
manufacturer before other working and auxiliary materials are used.
Any other application is considered improper use. The manufacturer is not liable for any resulting
damage. The operator is solely responsible for the risk. The machine is built according to the state-
of-the-art and in line with all recognised safety regulations. Nevertheless, its use may result in
danger to life and limb of the staff or third parties, or damage to the machine and other property.
The machine must only be used in a technically perfect condition, as intended, with due regard for
safety, an awareness of hazards and in due compliance with the operating manual. In particular,
faults that can affect safety must be eliminated immediately.
Observation of the operating manual and compliance with the servicing procedures are also part
and parcel of its intended use.
2.2.1

Staff requirements

The responsibilities of the personnel must be defined clearly for the start-up, operation,
maintenance and repair of the machine.
A distinction is made between different operating personal:
Production operator
The machine may only be operated by reliable, authorised and trained personnel. The legally
defined minimum age must be observed.
Setter for the machine overall operation
The machine must only be set-up by an authorised specialist and equipped for the operator.
Specialist for servicing and repair
The machine must only be maintained, repaired and recommissioned by an authorised specialist.
Work on the electrical system must only be performed by a qualified electrician.
It is expected that the electrical systems are commissioned, maintained and repaired by qualified
electricians and that this work is monitored and controlled by specialists. Qualified personnel are
persons who are authorised based on their education, experience and training as well as their
knowledge of the standards, requirements, operating conditions and accident prevention measures
by those responsible for the safety of the machine to perform the necessary activities and therefore
are able to recognise and prevent possible risks.
Translation of the original operating manual Steam Generator TD
14.11.2017
Safety
Site 30 of 96
English