Using the Wand or Wand Handle
CAUTION
Never pull the vacuum cleaner by the hose.
If using any accessory on the end of the handle the
entire wand must be removed from the body base.
Release the wand and handle:
1. Make sure the vacuum cleaner is locked in the
upright position and on a flat, stable surface.
2. Press the wand release button on the body and
tilt the wand handle.
3. Lift the wand out and up.
4. To use the handle only, press the release button
on the bottom of the handle and pull the wand
straight out of the handle.
5. To use the dusting brush, press the release
button on the front of the dusting brush and pull
the wand straight out of the dusting brush.
Second, pull the dusting brush toward handle.
After use, press the release button and pull out
the dusting brush.
NOTE: The dusting brush is surrounded with a soft
rubber coating to prevent damage to your furniture.
OPERATION
13