How To Use Basic Functions; Basic Operation - EAS ELECTRIC ERCLMAJ Manual De Instrucciones

How to Use Basic Functions

Basic operation

ATTENTION! Before operation, please
ensure the unit is plugged in and power
is available.
1
3
COOL Mode
1. Press the MODE button to select COOL
mode.
2.
Set your desired temperature using the
TEMP or TEMP
3. Press FAN button to select the fan
speed: AUTO, LOW, MED or HIGH
Press the ON/OFF button to start the unit.
4.
2
Fresh
button.
SETTING TEMPERATURE
The operating temperature range for units is
17-30°C (62-86°F)/20-28ºC(68-82ºF). You can
increase or decrease the set temperature in 1°
C (1°F) increments.
AUTO Mode
In AUTO mode, the unit will automatically select
the COOL, FAN or HEAT operation based on
the set temperature.
1. Press the MODE button to select AUTO.
2. Set your desired temperature using the TEMP
or TEMP button.
3. Press the ON/OFF button to start the unit.
NOTE: FAN SPEED can't be set in AUTO mode.
1
4
3
06
2
Fresh
V.1