Graf KLARO Easy Instrucciones Para El Montaje página 37

The locking height of the lifters depends on the system type and can be found in the table shown below.
Tank size A
mm
2x 2,700L 400
2x 3,750L 400
2x 4,800L 400
2x 6,500L 400
A - use of mini tank dome
A* - use of maxi tank dome
The clips of the PVC pipe clamps are then closed.
5.5 Installation of the crossbar
To fix the crossbar in the tank, holes are drilled through the opposing ribs in the access area using an 8
mm drill. The correct separation distance can be marked out with the aid of the crossbar.
The crossbar is then fixed into these holes using the M8 screws (2x M8x45), nuts (2x) and washers (4x).
The crossbar is then used to receive the holding plate from section 5.1.
5. Installation of the setting-up kit
A* B
mm mm
500 455
500 645
500 880
500 1155
35 / 92
A
B B