LAVAZZA Firmo INOVY Instrucciones De Empleo página 41

Lower the capsule loading lever to close the pod
fitting compartment.
Press and hold one of the three coffee delivery
/ / for at least 5 seconds. The selected
button will flash and the coffee machine will enter
the programming mode. Now release the key.
PREPARING THE COFFEE
During programming, the display shows the ani-
mation of the selected beverage.
Once the desired coffee amount is reached, stop
the brewing by pressing the button again.
If the programmed measure exceeds the maxi-
mum allowed (240 ml) the machine will automati-
cally stop delivery, the delivery button will blink
and the last programmed measure will be saved in
the memory.
If there is a power failure during programming, the
last programmed value remains in the memory.
If during a dose programming, water lack is indi-
cated, the machine stops the supply and the dose
being programmed won't be saved. Once filled
the water tank, repeat the dose programming pro-
cedure.
For a new supply cycle, wait for supply buttons
and multifunction button turning on with steady
white light.
Once supply is over, lift and then lower the capsule
loading lever to unload the exhausted capsule.
EN
41