Maintenance & Care - Bissell SPOTBOT 2114 Serie Guia Del Usuario

Maintenance and Care
1
Press the STOP button to turn the unit off.
Unplug the power cord from the outlet.
Wrap power cord around the cord wrap.
3
If you were using your SpotBot® manually,
wrap the vacuum flex hose around the
unit and secure the hose into the hose
connector on the front of the unit.
NOTICE: To reduce the risk of a leaking condition, do not store unit where
freezing may occur. Damage to internal components may result.
12
www.BISSELL.com
2
Empty and rinse the dirty water/collection
tank after each use. To remove the
tank, lift up the dirty tank latch and pull
the tank out. Dump out the dirty water
and rinse. Replace the tank into the unit
for storage. After using the SpotBot®'s
automated feature, wipe the window and
brushing area with a soft cloth.
Tips for Storing
• If a significant amount of water and
solution remains in the clean tank,
your unit can be stored with liquid in
the clean tank. However, if you have
added Oxy Boost into the clean
tank, it cannot be stored in the unit
and should be emptied and rinsed.
• Keep your machine clean and clean
out the black valve periodically
inside of the dirty water/collection
tank.
• Store machine in a protected, dry
area.