Troubleshooting - Bissell SPOTBOT 2114 Serie Guia Del Usuario

Ocultar thumbs Ver también para SPOTBOT 2114 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting

WARNING
To reduce the risk of electric shock, turn power switch off and disconnect plug
from electrical outlet before performing maintenance or troubleshooting checks.
Problem
Possible causes
AUTOMATED CLEANING
Power cord not plugged in
Blown fuse/tripped breaker
SpotBot® will
not run
Vacuum flex hose is not snapped
into place securely
Unusual or
Clean water/solution tank is
out of fluid
odd noise
Clean water/solution tank is out
of fluid
Reduced or
Clean water/solution tank is not
no spray
inserted into the unit securely
Tank is full
Dirty water/collection tank latch
No suction
is not down
Black valve on the dirty
water/collection tank is missing
MANUAL CLEANING
Power cord not plugged in
Blown fuse/tripped breaker
Cleaner will
not run
Hose not removed from receiver
SpotBot® shut off automatically
during use
Unusual or
Clean water/solution tank is
out of fluid
odd noise
Spray tip clogged on Tough Stain
brush
Clean water/solution tank is out
Reduced or
of fluid
no spray
Clean water/solution tank is not
inserted into the unit securely
Tank is full
Dirty water/collection tank latch is
No suction
not down
Black valve on the dirty
water/collection tank is missing
Remedies
Check electrical plug
Replace household fuse or reset
breaker
Check to make sure the vacuum flex
hose is snapped into place
Fill clean water/solution tank
Fill clean water/solution tank
Gently press the clean water/solution
tank until you see "bubbles" coming
from the base of the tank
Empty tank
Push latch down, securely into place
Replace black valve into dirty
water/collection tank
Check electrical plug
Replace household fuse or reset
breaker
Remove hose
Press Pause/Resume button to
resume manual cleaning
Fill clean water/solution tank
Clean spray tip
Fill clean water/solution tank
Gently press the clean water/solution
tank until you see "bubbles" coming
from the base of the tank
Empty tank
Push latch down, securely into place
Replace black valve into dirty
water/collection tank
www.BISSELL.com
13

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido