Sling Application Lying - Etac molift RgoSling Ampu MediumBack Manual De Usuario

5
B5. Place both leg supports under the user's
thighs, start with the shortest leg.
B6. Place the leg supports overlapped under both
thighs and pull strap loops through the guide
loops on the outside of the leg support.

Sling application lying

8
B8. Turn the user towards you until he/she is lying
safely on their side.
10
B10. Then turn the user over on the opposite side
and pull the sling forward. Make sure the
user is positioned at the centre of the sling.
If the bed has a bed back support it can be
used. Be careful when repositioning the user
over to the other side. Make sure he/she does
not flip over and rolls out of bed.
Etac Molift RgoSling / www.molift.com / www.etac.com
6
B7. Place the belt around the waist of the user
and tighten. The waist belt can be retightened
when lifting begins and when the sling is
loaded.
9
B9. Fold the sling using the folding line and posi-
tion it behind the user's back.
11
B11. Place the belt around the waist of the user
and tighten. The waist belt can be retight-
ened when lifting begins and when the sling
is loaded. Place the leg supports overlapped
under both thighs and pull strap loops
through the guide loops on the outside of the
leg support.
9.
7