Auto-On/Off Socket Outlet For Power Tools; Push&Clean; Auto Clean; Antistatic Connection - Narex VYS 33-21 L Instrucciones De Uso Originales

English
Turn I: Activate the machine
Turn
Permanent power on socket.
Turn
operation.
Turn I+
machine with deactivated auto-
matic filter cleaning function
Turn
On/Off operation with deactivated
automatic filter cleaning function.
Speed control operation on separate
turning knob
3.2

Auto-On/Off socket outlet for power tools

Appliance socket.*
The appliance socket is designed for electri-
cal auxiliary equipment; see technical data for
reference.
• Prior to plugging in an appliance, always
switch off the machine and the appliance
that is to be connected.
• Read the operating instructions to the ap-
pliance to be connected and observe the
safety notes contained in these.
An appliance socket with earthing contact is inte-
grated in the machine. An external power tool can
be connected there. The socket features permanent
power on, when the electrical switch is in position
, i.e. the machine can be used as an extension cord.
In position the machine can be switched on
and off by the power tool connected. Dirt is picked
up from the source of dust immediately. To comply
with regulations, only approved dust producing tools
should be connected.
The maximum power consumption of the connected
electrical appliance is stated in section "Specifica-
tions".
Before turning the switch to position
that the tool connected to the appliance socket is
switched off.
3.3 Push&Clean
*)
The "PC" machine is equipped with a semi automatic
filter cleaning system, Push&Clean. The filter clean-
ing system must be actuated latest when the suction
performance is no longer sufficient. Regular use of
the filter cleaning feature maintains suction perfor-
mance and increases the lifetime of the filter. For
instruction see quick reference guide.
3.4

Auto Clean

*)
The " C" machine is equipped with an automatic filter A
cleaning system, Auto
cle will automatically run during operation to ensure
that suction performance is always at its best.
If suction performance decreases or in extensive
38
: Stop the machine.
: Activate Auto-On/Off
Off: Activate the
+ Off: Activate Auto-
CAUTION
ensure
Clean. A frequent cleaning cy-
dust applications a manually filter cleaning operation
is recommended:
• Switch off the machine
• Close the nozzles or suction hose opening with
the palm of your hand.
• Turn the switch to position „I" and let the ma-
chine operate at full speed for approx. 10 sec-
onds with the suction hose opening closed.
If suction power is still reduced take out the filter and
clean mechanically or replace filter.
For certain applications, like wet pick up, it is recom-
mended to turn off the automatic filter cleaning sys-
tem. For details see chapter 3.1.
3.5

Antistatic connection

CAUTION
The machine is equipped with an antistatic
system to discharge any static electricity that
may develop during dust pick-up.
The antistatic system is placed in front part of the
motor top and creates an earth ground connection
to the inlet fitting of the container. For proper func-
tion the use of an electrical conductive or antistatic
suction hose is recommended. When inserting the
optional disposal bag make sure the antistatic con-
nection is kept.
3.6

Cooling air filter

To protect the electronics and motor, the machine is
equipped with a cooling air diffusor. Clean the cool-
ing air diffusor regularly.
For areas with a high concentration of fine dust in
the surrounding air it is recommended to equip the
machine with an optional cooling air filter cartridge to
prevent dust from settling inside the air channels and
motor. Contact your local sales representative.
CAUTION
If cooling air filter is clogged by dust the over-
load protection switch in the motor can be acti-
vated. In such case switch off the machine,
clean cooling air filter and allow machine to
cool for approx. 5 minutes.
3.7

Wet pick-up

CAUTION
The machine is equipped with a water level
limit system which shuts off the machine when
the maximum liquid level is reached.
When this occurs, switch off the machine.
Disconnect the machine from the socket and
empty the container. Never pick up liquids
without the water level limit system and filter in
place.
Picking up liquids.
• Do not pick up flammable liquids
• Before liquids are picked up, always re-
move the filter bag/wastebag and check
that the water level limit works properly.
Optional accessories / Option depending on model
*)
OEL=Occupational Exposure Limit
1)
*)