Technical Data; Special Safety Instructions - RAWLINK 56692 Manual De Instrucciones

HYDRAULIC JACK
Introduction
To get the most out of your new hydraulic
jack, please read through these instructions
before use. We also recommend that you
keep this user manual so you can refer to it
at a later date.

Technical data

Lifting capacity:
Lifting height:

Special safety instructions

• Read, study and understand all
warnings and operating instructions
prior to use.
• This is a lifting device only. The load
must be supported immediately by
other appropriate means.
• Lift only on areas of the vehicle as
speci� ed by the vehicle manufacturer.
• Center load on saddle prior to lifting.
• Some vehicles require an adapter to
properly engage the frame for lifting.
Use vehicle manufacturer's instructions
on proper lifting.
• No alterations to the jack shall be made.
• Only attachments, restraints or adapters
supplied by the manufacturer shall be
used.
• Failure to heed these warnings may
result in personal injury and/or property
damage.
• The hydraulic jack must only be used
as a lifting unit, never as an axle stand.
Before you commence any type of work
under a raised car or similar, you MUST
have suitable axle stands in place.
22
•
•
•
1.5 tonnes
•
128-300 mm
•
WARNING!
1. Read, study and understand all warnings
2. Do not overload this jack beyond the
3. This jack is designed for use only on hard
4. This is a lifting device only. The load must
5. Do not move or dolly the vehichle while
6. Lift only on areas of the vehicle as
7. Center load on saddle prior to lifting.
8. Some vehicles require an adapter to
9. No alterations to the jack shall be made. /
10. Only attachments, restraints or adapters
The hydraulic jack must only be used on
a permanent, even and level surface.
If the hydraulic jack is overloaded, this
can lead to serious personal injury and
material damage. Do not lift weights
greater than the jack's lifting capacity.
Always position the weight in the centre
of the lifting tray. If the weight is uneven,
the jack may become damaged or drop
the load.
Never push or pull a car which has been
lifted by the hydraulic jack.
Always inspect the jack before use and
do not use it if there are cracks in the
welding joints, or if it is damaged in any
way.
and operating instructions prior to use.
rated capacity.
level surfaces capable of sustaining the
load.
be supported immediately by other
appropriate means.
on the jack.
speci� ed by the vehicle manufacturer.
properly engage the frame for lifting. Use
vehicle manufacturer's instructions on
proper lifting.
supplied by the manufacturer shall be
used.