Bimar VTM310 Folleto De Instrucciones página 15

USE
Before using, check that the equipment is in good state, that the electric cord is
not damaged. If the power cord is damaged, it must be replaced by the
manufacturer of its technical service, or by a similarly qualified professional, to
prevent any and all risk.
Insert the plug into the electric socket.
Fan: select the speed desired using the selector switch (2):
I - Minimum speed II - Medium speed III - Maximum speed
To turn off the fan, press the "O" button and then remove the plug from the
electric socket.
Horizontal oscillation (right-left): this motion is obtained by pressing the dedicated
button (6) located on the motor body. To eliminate the movement and keep the
fan still, lift the selector switch.
1. Oscillation button
2. Selector switch
3. Riase/lower friction screw
4. Support screw
5. Rod
6. Washer
7. Nut with handle
8. Base
9. Nut with handle for support
screw
10. Safety screw
11. Rear grille