Special Warnings; Important; Before Starting Installation - Fulgor Milano 700 Serie Instrucciones Para La Instalación

1 - Special Warnings

EN
Proper installation is your responsibility.
Have a qualified technician install this cooktop.

IMPORTANT

- Observe all governing codes and ordinances.
- Write down the model and serial numbers before installing
the cook top. Both numbers are on the serial rating plate
located on bottom of cooktop housing.

Before Starting Installation

WARNING
It is the customer's responsibility to contact a qualified
electrical installer to ensure that the electrical installation is
adequate and in conformity with national electrical code:
ANSI/NFPA 70-latest edition** or CSA standards C22.1-
94, Canadian Electrical Code, part No.0-M91 - latest
edition*** and all local codes and ordinances.
Copies of the standards listed may be obtained from:
** National Fire Protection Association One Batterymarch Park
Quincy, Massachusetts 02269
*** CSA International 8501 East Pleasant Valley Rd. Cleveland,
OH 44131-5575
To eliminate the risk of burns by reaching over heated surface
units, cabinet storage space located above the surface units
should be avoided. If cabinet storage is to be provided, the
risk can be reduced by installing a range hood that projects
horizontally a minimum of 5" (12,7 cm) beyond the outer edge
of the cabinet.
2
IMPORTANT INSTRUCTION
Please read all instruction before using this appliance.