Fulgor Milano 700 Serie Instrucciones Para La Instalación página 8

EN
Cutout width
30"
(76.2cm)
36"
(91.4cm)
Cutout width
30"
(76.2cm)
Height from countertop to
36"
nearest cabinet on either
(91.4cm)
IMPORTANT
Under the cooktop it is necessary to install a partition, as
shown
4
CUTOUT REQUIREMENTS
G
C
F
A
28-3/4" +/- 1/16"
(73.0 cm +/- 0.1cm)
34-5/8" +/- 1/16"
(87.9 cm +/- 0.1cm)
D
18"
(45.7 cm) min (76.2 cm) min.
(see note*) Clearance from
countertop to unprotected
side of unit overhead surface
WALL COVERING CABINETS,
AND COUNTERTOP MUST
WITHSTAND HEAT UP TO 93° C (200° F)
E
D
B
19-7/16" +/- 1/16"
(49.4 cm +/- 1mm)
19-7/16" +/- 1/16"
(49.4 cm +/- 1mm)
E
30"
(5 cm) min
Clearance from cutout to
side wall on the left and
right of the unit
NOTE: 24" (61 cm) min. clearance if bottom of wood or metal
cabinets is protected by not less than 1/4" (0.6 cm) flame
retardant millboard covered with no less than No. 28 MSG
sheet steel 0.015" (0.04 cm) stainless steel, or 0.024"
(0.06 cm) aluminum or 0.020" (0.05 cm) copper. 30"
(76.2 cm) min. clearance between top of cooking platform
and bottom of unprotected wood or metal cabinet.
C
30"
(76.2 cm) min
36"
(91.4 cm) min
F G
2" 13"
(33 cm)
Depth of unprotected
overhead cabinets