SAFE-TECH SVD 14 Manual Del Usario página 23

The default video output setting is "AUTO", meaning the DVR will automatically detect
the video output source. When "VGA" and "MONITOR" are both connected, the default
monitor output is VGA.
To change the video output setting manually:
„
To force the video output via "MONITOR", press the left key
DVR power-on.
„
To force the video output via "VGA", press the right key
power-on.
The setting is changed when you hear a short beep sound.
OR:
When the DVR is powered on and initialized, right-click to show the main menu, and
select "ADVANCE CONFIG" Æ "DISPLAY" Æ "DISPLAY OUTPUT PATH".
Select "VGA" to switch to the connected LCD monitor, or "COMPOSITE" to switch to the
connected CRT monitor. The DVR will then reboot for the change to take effect.
CAMERA
DE-INTERLACE
DETECTION
FULL SCREEN DURATION
ALERT
QUAD SCREEN DURATION
NETWORK
DISPLAY COVERT
SNTP
HDD DISPLAY MODE
DISPLAY
DISPLAY OUTPUT PATH
RECORD
ALPHA BLENDING
REMOTE
EXIT
ADVANCE CONFIG
(For Selected Models Only)
(For Selected Models Only)
18
BASIC OPERATION
on the DVR front panel at
on the DVR front panel at DVR
OFF
03
03
ON
HDD SIZE
AUTO
200