Detailed Record Setting - SAFE-TECH SVD 14 Manual Del Usario

3) IMAGE PER SECOND
Select the images per second for MANUAL RECORD.

5.2.2 Detailed record setting

Right-click to display the main menu, and select "ADVANCE CONFIG" Æ "RECORD".
Note: Please DO NOT change the date or time of your DVR after the recording
function is activated. Otherwise, the recorded data will be disordered and
you will not be able to find the recorded file to backup by time search. If
users change the date or time accidentally when the recording function is
activated, it's recommended to clear all HDD data, and start recording
again.
CAMERA
DETECTION
ALERT
NETWORK
SNTP
DISPLAY
RECORD
REMOTE
EXIT
1) MANUAL RECORD ENABLE
Set the manual recording function on / off.
2) EVENT RECORD ENABLE
Set the event recording function on / off.
3) TIMER RECORD ENABLE
Set the timer recording function on / off.
4) EVENT RECORD IPS
Select the images per second for EVENT RECORD (Recording that is triggered by
alarm or motion).
5) TIMER RECORD IPS
Select the images per second for TIMER RECORD (Recording that is activated
according to the scheduled time).
6) PRE-ALARM RECORD
Select to enable or disable the pre-alarm function (ON / OFF).
When pre-alarm and event recording functions are both activated, the DVR will
ADVANCE CONFIG
MANUAL RECORD ENABLE
EVENT RECORD ENABLE
TIMER RECORD ENABLE
EVENT RECORD IPS
TIMER RECORD IPS
PRE-ALARM RECORD
(For Selected Models Only)
OVERWRITE
EVENT RECORD ALL CHANNEL
KEEP DATA LIMIT (DAYS)
(For Selected Models Only)
20
FREQUENTLY-USED FUNCTIONS
ON
ON
ON
120
120
ON
ON
OFF
OFF