SICK Stsndart IN4000 Instrucciones De Servicio página 74

Chapter 4
Fig. 4: Minimum
distances on
mounting the
IN40-D0101K
safety switch
74
Mounting
• Pay attention to safe switch off distance and enable
zone (cf. Tab. 1).
• The minimum distances stated in Fig. 4 for neigh-
bouring sensors, sensors mounted opposite and the
minimum distances to fixed parts of the plant and
walls must be observed.
Angle
• The IN40-D0101K safety switch must be mounted
such that the sensing face is orientated towards the
moving part of the guard (door or similar). The
sensing face can be aligned if required.
© SICK AG • Industrial Safety Systems • Germany • Subject to change without notice • 8010934/YTC9/2016-04-01
Operating Instructions
IN4000 Standard
Channel