SICK Stsndart IN4000 Instrucciones De Servicio página 76

Chapter 4
Fig. 5: Alignment
of the sensing
face on the
IN40-D0101K
safety switch
76
Mounting
a
c
e
• Fasten safety switch with the aid of a mounting
bracket at the selected mounting location, if
possible so that it cannot be detached, and fasten
in the selected position. Tighten self-locking screws
to 1.0 Nm.
© SICK AG • Industrial Safety Systems • Germany • Subject to change without notice • 8010934/YTC9/2016-04-01
Operating Instructions
IN4000 Standard
b
d
f