For Parts Call 606-678-9623 or 606-561-4983
For Parts Call 606-678-9623 or 606-561-4983
MAINTENANCE AND REPAIR INSTRUCTIONS
MAINTENANCE SCHEDULE
Perform these required maintenance procedures at the
frequency stated in the table. These procedures should
also be a part of any seasonal tune-up.
NOTE: Some maintenance procedures may require spe-
cial tools or skills. If you are unsure about these
procedures take your unit to any non-road
engine repair establishment, individual or author-
ized service dealer.
A good preventive maintenance program of regular inspection and care will increase life and improve performance of
your chain saw. This maintenance checklist is a guide for such a program.
Cleaning, adjustment, and part replacement may be required, under certain conditions, at more frequent intervals than
those indicated.
MAINTENANCE CHECKLIST
ITEM
SCREWS / NUTS / BOLTS
AIR FILTER
FUEL FILTER / OIL FILTER
SPARK PLUG
SPARK ARRESTER SCREEN
FUEL HOSES
CHAIN BRAKE
®
COMPONENTS
*Recommended for Maintenance by an Authorized Service Center Technician.
ACTION
INSPECT / TIGHTEN
CLEAN OR REPLACE
REPLACE
CLEAN / ADJUST / REPLACE
INSPECT
REPLACE AS REQUIRED
INSPECT
*REPLACE AS REQUIRED
INSPECT
*REPLACE AS REQUIRED
www.mymowerparts.com
www.mymowerparts.com
NOTE: Maintenance, replacement, or repair of the emis-
sion control devices and system may be per-
formed by any non-road engine repair establish-
ment, individual or authorized service dealer.
WARNING:
maintenance or repairs with unit running.
Always service and repair a cool unit.
Disconnect the spark plug wire to ensure that
the unit cannot start.
EACH USE
14
To prevent serious
injury, never perform
HOURS OF
OPERATION
10
20