Stuv TULOX 100 Instrucciones De Montaje página 10

Installation Instructions TULOX 100 + TULOX 200
Application
STUV - Products are designed for highest demands and maximum reliability.
Application and installation recommendations and our comprehensive consulting service
provide support for the choice of our products.
STUV - High security locks of the 4.17.10 series are intended for use on doors of secure storage
units. Res ponsibility for verifi cation and suitability for the respective application resides
with the user!
Changes to the products lead to the loss of the VdS* approval and any guarantee and
warranty claims.
Basics:
The precise position and mounting of the locking mechanism play a major role in the correct func-
tioning of the lock. The locking mechanism must be aligned precisely in both horizontal and vertical
position.
The lock must be attached with three cylinder head screws M6 or BSW ¼". The length of engage-
ment of the screw must comply with valid standards. It must be ensured that the fi xing is secured
against unintended loosening. Vibration or concussion must not lead to a loosening of the fastening.
The lock may only be installed on the right and in load position (vertical bolt position). Other instal-
lation positions may lead to closing problems.
When installing the lock in secure storage units attention must be paid to adequate protection
against forcible external attacks. The key hole of the secure storage unit door and the armouring
may not exceed the shown key hole dimensions (Figure 1).
*VdS: German independent testing institution
- 10 - Steinbach & Vollmann Ibérica, S.L. • 20500 Arrasate - Mondragón • España