Stuv TULOX 100 Instrucciones De Montaje página 12

Installation Instructions TULOX 100 + TULOX 200
The locking direction of the lock can be adjusted to the required installation situation. The spring
and the cogwheel must be removed from the base plate for this purpose. The cogwheel can now
be turned in the desired position in 90° steps and both parts can then be re-assembled (Figure 3).
- 12 - Steinbach & Vollmann Ibérica, S.L. • 20500 Arrasate - Mondragón • España
Pay attention that the cable is positioned around the
screw head and cannot be jammed.
Cogwheel
Spring
Figure 2
Figure 3