Environmental Impact; Installation Warnings - Nilo SPA MET Manual De Empleo

TRANSPORT
Please check the packaging integrity and the affinity of the product with the order before
accepting the delivery.
In case of damages/errors, refrain from signing the delivery note and get in touch with your
dealer, quoting the model and the serial number of the item (values composed by 8 digits
preceeded by the indication S/N ).
The bed is supplied completely assembled, inside a special cardboard box, internally reinfor-
ced with special protections.
The bed is placed inside the packing upside-down with feet upward. To extract the bed from
the packing, we sugest to first remove the internal protections, and then lift it and pull it out.
Such an operation must be performed by two operators, at both ends of the bed.
Packing sizes: mm 810 x 2120 x H 800
Bed weight (packed): Kg 140
Environmental conditions for transport : Temperature from -20°C to +60°C
Relative humidity from 10% to 75%
Athmospheric pressure from 500 hPa to 1060hPa

ENVIRONMENTAL IMPACT

It is obligatory to protect the environment and the legislations in terms of differentiated
waste disposal. It is suggested to store the packaging safe for its possible future use. All
packing materials are of low environmental impact, complying with existing European rules
and do not contain CFC.

INSTALLATION WARNINGS

Make sure the electricity set up of the destination site was carried out in compliance with the
existing rules. The site floor must be smooth, flat and able to bear the weight of the bed.
Make sure that the voltage(Volts) and the power (Watt = Volt x Ampere) are compatible with
the electricity available at the outlet in the wall.
Plug in the power cable to a suitable outlet.
Make sure the outlet is ground connected.
It is absolutely prohibited to install the equipment near bathtubs, basins or any other contai-
ner/sources/equipments that might accidentally spread and/or contain liquids, as well as
near flame or heat sources: the danger exists even when the equipment in not being used.
Environmental conditions for use : Temperature from -5°C to +40°C.
19