Installation Diagram; Commissioning - Bosch 7 709 003 614 Manual De Instrucciones

All connections in the set are of type M 3/4".
Shutoff valves are recommended on the
water branch lines linked to the Solar Kit.
Shutoff valves are recommended on the
water branch lines linked to the Solar Kit.
NOTICE: damaged parts!
Water dirtness may cause damaged to
several parts.
B Place the water filter (Fig. 1, [14]) in the
water inlet (Fig. 3, [1]).
4.4

Installation diagram

6
Fig. 4
1 Appliance support input
2 Appliance support output
3 Cold water from the distribution network
4 Hot water for the distribution network
5 Hot water from the solar system
6 Solar colector
4.5

Commissioning

Prior to commissioning the Solar Kit, the installation
needs to be cleaned in order to remove any dirt that has
accumulated during assembly.
Not removing all dirt may affect the
product's performance and the
manufacturer's warranty.
6 720 608 087 (2011/01)
2
1
4
3
5
6720608350-03.3Av
Use filters of suitable capacity at the distribution
network's water inlet. In those areas that are subject to
very aggressive water, make sure that the water can be
treated prior to entering the Solar Kit.
Put the Kit into service
B open the valves allowing water to flow through.
B check for leaks at all connecting points.
Installation
7