Use; Operation; Adjusting Thermostatic Valves - Bosch 7 709 003 614 Manual De Instrucciones

Use

5 Use
5.1

Operation

The Solar Kit does not have any type of electrical
connection, which is why its commissioning operation
becomes extremely simple; just:
B open the valves allowing water to flow through.
After this procedure, whenever a hot water tap is
opened, one of two situations will occur:
1. The solar system's water temperature will exceed
45 °C
The deflector valve will close the water inlet on the
support appliance and the water will be channeled to
the mixing valve. There, the water will be mixed with
cold water from the distribution network, to the defined
adjustment temperature
2. The solar system's water temperature will be lower
than 45 °C
The deflector valve will close the water inlet to the
mixing valve and the water will be channeled to the
support appliance, where its temperature will be
increased. The water that will result from this process
will then pass through the mixing valve, where it will be
mixed with cold water, to the defined adjustment
temperature.
5.2

Adjusting thermostatic valves

The thermostatic valves included in the Solar Kit come
sealed and are both preset to 45 °C. Should you wish to
modify these settings, please contact a qualified
technician.
WARNING:
if this specification is modified by a non-
accredited technician, the Solar Kit may not
work properly, as a result.
8 6 720 608 087 (2011/01)