Steren MUL-057 Manual De Instrucciones página 13

IMPORTANT
Antes de utilizar su nuevo Kit C
Before using your new Data hold digital multimeter, please
read the following recommendations.
NEVER apply voltage or current that exceeds the maximum
specifications of measurement of the multimeter.
CAUTION when you are working with high voltages.
NO MEASURE voltages higher than 600V
NEVER connect the testing cables to a voltage source, when
the switch is in the scale; Current, Resistance or Diode test
Doing so may damage the multimeter.
ALWAYS discharge the capacitors before measuring.
ALWAYS place the function switch to the position off when you
do not use the multimeter.
ENGLISH-02