Numbering Function - Brother P-touch 1300 Manual Del Usaurio

This function can be used to print many copies of the same text while increasing a cer-
tain number in the text by 1 after each label is printed. This type of automatic incre-
mentation is very useful when printing serial number labels, production control labels
or other labels requiring ascending codes.
To use the numbering function:
1 Press ,
wish to increase.
2 Hold down
appears in the display.
To quit the numbering function without printing, hold down
press
Press the number key (
3
Print Print
Press (or
4
played while it is being printed.
After printing with the tape margin function set to NONE, hold down
Code
some of the printed characters may be cut off.
5 Press in the tape cutter lever to cut the tape, and then use scissors to cut along the
printed dots to separate the labels.
EXAMPLE
To print three door labels for studios 1, 2 and 3:
1 Position the cursor below "1".

NUMBERING FUNCTION

Home
, or
End
and press
Code
V
(or press just
Number
Size
to
1
Memory
) to begin printing the labels. The number of each copy is dis-
Feed
and press
Sym.
to position the cursor below the number that you
V
. The message "NUMBER UNTIL 1–9?"
Number
Clear
).
BS
Frame
) of the last number that is to be printed.
9
once to feed the tape before cutting it, otherwise
Wide A
C L E A R
1: S T U D I O 1 _
Caps
A A
A
A
A
A
A A A A
and
Code
Auto
Underline
Frame
Length
55