Klarstein 10031434 Manual Del Usaurio página 46

For Moldings
Remove the pillars. (Remove the slit por-
tions on the bottom frame using nippers.)
For Side Piping
Remove the pillars. (1) Remove the 7screws.
(2) Remove the upper casing (2 tabs). (3) Re-
move the left and right casings (2 tabs on
each side ). (4) Remove the slit portions on
the bottom frame and casings using nippers.
(5) Return by following the steps in reverse
order (3>2> 1).
(3) Side
casings
Casing
Remove the pillar
(2) Upper casing
Remove 7 screws
Remove the pillar
(3) Side
casings
Bottom frame
casing
Remove the pillar
46