STEINEL Professional HG 2310 LCD Manual De Instrucciones página 6

k
A
k
B
k
C
k
D
Prod. No. 076467
k
E
Prod. No. 076566
k
F
10
Plastic repair kit for motor vehicles
Dear Customer,
Dear Customer, Thank you for purchasing the
STEINEL plastic repair kit for motor vehicles.
This brochure describes a new method of
repairing motor vehicle plastics. From now on,
What's different about this system?
The special welding rod can be used on all
thermoplastics. As a result, the painstaking
process of finding out the type of plastic you
want to work on now belongs to the past.
Important: the Multi-Thermoflexx welding rod
must always be used in conjunction with the
stainless steel wire mesh. It is highly flexible,
extremely resistant to stress cracking and
Contents
k Reduction nozzle, 9mm
A
k Vehicle repair nozzle
B
k Temperature guard
C
k Multi-Thermoflexx welding rod,
D
Prod. No. 076467
Additional safety notification
Not suitable for repairing:
– rubber parts
– pipes
– load-bearing parts
– film, foil or sheeting
Caution:
Unfamiliar plastics present a risk of fire and
poisoning. Carry out a melting test on an
inconspicuous spot to identify the thermo-
plastic material. Always ensure good ventilation
while working. Do not inhale vapours.
For further details on the tool and its applications, please refer to the HG 2310 LCD operating
instructions.
the special welding rod and specially
developed vehicle repair nozzle will make
it easier and save time welding a whole
host of plastic components.
bonds well with all thermoplastics. Thermoplas-
tics can be worked and re-worked over long
periods.
Best results can only be achieved with the
Multiflexx welding rod by using the vehicle
repair nozzle (see "This is how it's done").
k Stainless steel wire mesh, Prod. No. 076566
E
k HG 2310 LCD
F
Please note that when working on the motor
vehicle, its fuel may increase the risk of
explosion.
Always observe the safety warnings in the
operating instructions provided with the
HG 2310 LCD.
11