Publicidad
Idiomas disponibles
Idiomas disponibles
2.0 TECHNICAL SPECIFICATIONS
Model
Sustaining
Capacity
(tonnes)
Closed Height
SJ156
SJ158
10,9
SJ1512
SJ208
SJ2010
18,1
SJ2012
SJ258
SJ2512
21,8
SJ2518
3.0 JACK OPERATING INSTRUCTIONS
Place the jack on a firm foundation, capable of supporting the expected load. Make sure the jack base is properly aligned perpendicular to the load
and that the base is fully supported. Also, be sure that the jack is properly supported at the lifting point in a manner that
the jack cannot slip or the load cannot shift.
CAUTION: The operator should make sure that the area is clear of personnel and objects obstructing working
space required to safely move the jack lever bar in both the counter clockwise and clockwise direction.The
operators head and body should be positioned to one side of the lever bar in a manner to prevent serious
injury should the lever bar suddenly swing unrestricted.
WARNING: Use the simplex lever bar recommended for the specific jack model. The lever bar to be used
should not exceed the length specified in the table. Lever bar extenders must not be used.
To operate, insert the lever bar illustrated in (2) into the selected hole of the jack's 4-way head. Make sure that the lever
bar engages full length of the hole. Grip the lever bar firmly, and exerting a controlled force, turn screw clockwise to
extend or counter clockwise to retract, moving the bar to the adjacent hole between rotations of the screw.
WARNING: Do not exceed the jack travel shown in the table. Read warning and caution notes and observe the screw during operation as
illustrated in (3), to make sure that the bottom of the screw is never extended beyond the top of the safety peephole. Exceeding maximum
travel could result in loss of stability and cause the load to topple. Do not continue to apply force to the lever bar after the load makes
contact with immovable objects, or when maximum travel is reached.
••• 3 •••
A
B
Dimensions (mm)
A
B
Stroke
248
95
295
146
397
248
298
127
349
178
400
229
330
108
432
210
584
362
< 9ͦ saddle tilt
C
C
Base Diameter
Cap Diameter
121
140
159
152
165
171
165
184
216
Handle
Effort / Ton
D
(kg)
7,3
73
7,3
7,3
6,8
79
6,8
6,8
6,8
83
6,8
6,8
1
2
Weight
(kg)
4,5
5,4
7,3
7,7
9,1
10,9
12,7
16,8
23,6
3
Publicidad
