Electrolux EWC 1050 Manual De Instrucciones página 7

drum, one item at a time, shaking them out
as much as possible. Close the door.
Measure out the detergent and the
fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent re-
quired, pour it into the larger compartment
on the left .
If required, pour fabric softener into the
smaller compartment marked
amount used must not exceed the «MAX»
mark in the drawer). Close the drawer gen-
tly.
Select the required programme by
means of the programme selector dial
(9)
Turn the programme selector dial to the re-
quired programme. The selector can be
turned either clockwise or anticlockwise.
The green light of button 6 starts to flash
On programme progress display the pilot
lights corresponding to all phases compos-
ing the selected programme are lit.
On position
the machine is switched OFF.
At the end of the programme the selec-
tor dial must be turned to position
switch the machine off.
Important! If you turn the programme
selector dial to another programme when
the machine is working, the lights in the
programme progress display will start to
flash to indicate a wrong selection. The
machine will not perform the new selected
programme.
Select the spin speed, Rinse Hold or No
spin option (8)
Select the spin speed, Rinse Hold option or
(the
No Spin option by turning the spin speed
selector.
• The position 1300 (or 1000) is equivalent
to 900 rpm for the synthetic and wool
programmes and 700 rpm for the deli-
cate wash programme.
• The position 500 is equivalent to 500 rpm
for the synthetic and wool programmes
and 450 rpm for the delicate wash pro-
gramme.
Rinse hold
electrolux 7
the programme is reset and
to