Eaton NFFLD-L Instrucciones De Instalación página 4

Installation Instructions - NFFLD-L/UFLD-L
Accessories
Tools Required
Phillips screwdriver.
Wire Guard (Figure 5.)
1. Loosen and remove the existing (8) 10-24 Philips head
screws on the face of the fixture and retain for future
reference.
2. Align wire guard on top of lens clips matching the four
existing holes. (Figure 5.)
3. Retighten (8) 10-24 Philips head screws from step 1, to
the face of the fixture.
4. To remove wire guard follow steps 1-3 in reverse order.
Vandal Shield (Figure 6.)
1. Loosen and remove the existing (8) 10-24 Philips head
screws on the face of the fixture.
2. Align (8) 7/8" long spacers with existing holes.
3. Use (8) 10-24 x 1-1/2" screws to secure vandal shield
on top of fixture. (Figure 6.)
4. To remove vandal shield follow steps 1-3 in reverse
order.
Figure 5.
4
EATON
IB506004EN Installation instructions
Figure 6.
Visor (Figure 7.)
1. Loosen and remove the existing (4) 10-24 Philips head
screws on the face of the fixture and retain for future
reference.
2. Align visor on top of lens clips matching the (4) existing
holes. (Figure 7 .)
3. Use the existing (4) 10-24 Philips head screws to
secure visor.
4. To remove visor follow steps 1-3 in reverse order.
Figure 7.