Iso Ddin Radio Provision - Metra 99-6510 Instrucciones De Instalación

ISO DDIN radio provision

1. Attach the radio brackets to the radio
housing by sliding the grooves in
the brackets, into the housing. The
following step will secure the brackets
in place. (Figure A)
2. Attach the radio brackets to the radio
using the screws supplied with the
radio. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
4. Secure the radio assembly to the dash
using the factory screws.
5. Reassemble the dash in reverse
order of disassembly to complete the
installation.
KIT ASSEMBLY
(Figure A)
(Figure B)
REV. 2/13/2018 INST99-6510
9