Publicidad
Idiomas disponibles
Idiomas disponibles
ISO DIN radio provision with pocket
1. Attach the radio brackets to the radio
housing by sliding the grooves in
the brackets, into the housing. The
following step will secure the brackets
in place. (Figure A)
2. Attach the pocket to the radio brackets
using the (4) #8 x 3/8" Phillips screws
provided. (Figure B)
3. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
4. Slide the radio into the bracket/pocket
assembly, and then secure it using the
screws supplied with the radio.
(Figure C)
8
KIT ASSEMBLY
(Figure A)
(Figure B)
5. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
6. Secure the radio assembly to the dash
using the factory screws.
7. Reassemble the dash in reverse
order of disassembly to complete the
installation.
(Figure C)
|
1.800.221.0932
MetraOnline.com
Publicidad
Capítulos
