Ddin Radio Provision - Metra 99-7804B Instrucciones De Instalación

ISO DDIN radio provision
1. Attach the radio brackets to the
radio housing trim panel using
(4) of the #6 x 3/8" Phillips screws.
(Figure A)
2. Attach the top bracket to the top of
the radio brackets using (4) of the
#6 x 3/8" Phillips screws supplied.
(Figure B)
3. Slide the radio into the bracket/
trim panel assembly and secure
to the assembly using the screws
supplied with the radio. (Figure C)
4. Attach the A/C vents to the radio
trim panel and secure using (2)
of the supplied #8 x 3/8" Phillips
screws. (Figure D)
Kit Assembly
(Figure A)
(Figure B)
99-7804B
5. Locate the factory wiring harness
in the dash. Follow the Wiring and
Initialization section of this manual
before completing the installation.
6. Reassemble dash in reverse
order of disassembly.
6
(Figure C)
(Figure D)