Control Buttons - Fermax SMILE VDS BASIC Guía Inicio Rápida

START GUIDE FOR THE SMILE VDS BASIC MONITOR

CONTROL BUTTONS

Inductive loop label,
(depending on model)
a
b
HOW TO PROGRAM THE SMILE MONITOR
1. INSTALL
Monitor powered for the fi rst time.
The wildcard button blinking (red) indicates that the monitor
has not been programmed.
When the monitor is programmed, the red LED is off.
2. ENTER PROGRAMMING MENU
Press the button
PROGRAMMING FROM THE PANEL
_ _ _
_ _ _
_ _ _ _
1 1 1 1
PROGRAMMING MENU
Select with
the option and you hear a beep on the monitor. Enter the calling code for this monitor from
the panel (calling code for this monitor). A different call tone sounds, confi rming the monitor´s
programming. After a few seconds the monitor returns to standby.
2
VDS SMILE MONITOR
Digital menu for internal parameter settings and confi guration.
Press for 3 seconds to access the installer menu and ring tone menu.
Short press to display the Shortcut buttons.
In conversation or only video, press to open the door.
In standby, call to guard unit (if applicable).
Audio activation and hang-up (hands-free functions)
Wildcard button (default function/available on depending model):
Press for 1 second to perform auto-start.
With video, press and hold this button for 2 seconds to sequentially
select between the main camera and the secondary camera.
The SMILE monitor incorporates an OSD menu that is managed via the
monitor's navigation buttons
on the monitor to access the terminals'user and programming functions.
for 3 seconds to access the "programming menu".
_ _ _
_ _ _
_ _ _ _
1 1 1 1
< 2 and half min
the icon and confi rm with
a by pressing the capacitive buttons
PROGRAMMING (VDS#)
- FROM THE PANEL
- FROM THE MONITOR
1

, a confi rmation screen appears confi rming
b
_ _ _
_ _ _
MASTER PANEL
Cod. 97712m V10_16