Apex XT Auto Manual Del Usaurio página 9

XT Auto/ English
3. Installation
3.1 Unpacking
To secure its contents inside, the CPAP device and accessories are bundled in a paper packaged box.
Unpack this box by removing the CPAP and its accessory and checking for any damage, which may
have occurred during shipping. If there are damages, please contact your dealer immediately.
3.2 Setting Up
1) Connect the power cord to CPAP device and plug into main
electrical outlet.
Once the power cord is plugged into the electrical outlet, the
device is in ready to operate position ("STANDBY" sign appears
in LCD display)
NOTE: The plug is also served to disconnect the
device.
2) Connect one end of the air tubing firmly to the air outlet of the
CPAP.
3) Connect the other end of the air tubing to the mask system.
Putting on the mask and headgear according to the mask
instruction manual.
6