Andis AGRC Manual De Instrucciones página 3

model agrC Cord pack use
1. Models AGRC/AGRV/AGR+ can be used with either the cord pack or
the battery.
2. Remove the transformer wall plug and clipper from the carton.
3. With the clipper in the "OFF" position, insert the adapter plug into
the bottom of the clipper. Note that the adapter plug is fitted with a
tongue to align properly with the groove in the clipper. Once the
adapter plug and clipper are aligned, press firmly together. You may
hear a click as the adapter plug contacts engage.
4. Plug the transformer wall plug into the AC outlet as identified on
the carton.
5. The clipper is now ready to be used.
model agrv Cord pack use
1. Models AGRC/AGRV/AGR+ can be used with either the cord pack
or the battery.
2. Remove the transformer wall plug and clipper from the carton.
3. With the clipper in the "OFF" position, insert the adapter plug into
the bottom of the clipper. Note that the adapter plug is fitted with
a tongue to align properly with the groove in the clipper. Once the
adapter plug and clipper are aligned, press firmly together. You
may hear a click as the adapter plug contacts engage.
4. Plug the transformer wall plug into the AC outlet as identified on
the carton. The AGRV cord pack features a power indicator light
on the underside of the cord pack tongue. When the light is
illuminated, it signifies that the unit has power. note: The light
may stay illuminated for a few seconds after unit is unplugged.
5. The clipper is now ready to be used.
6. The AGRV cord pack features five speeds. The speeds are
controlled by buttons on the underside of the cord pack tongue
(Diagram A). To increase or decrease the speed, press the button
to reach the desired speed.
7. You may turn off the clipper when using it at any speed.
8. The speeds are stored in memory, therefore when you turn on the
clipper, it will run at the last speed you were using prior to turning
it off and unplugging it.
Battery
Release
Tongue
Adapter
Plug
Transformer
Wall Plug
Battery
Release
Tongue
Adapter
Plug
Transformer
Wall Plug
Speed
Buttons
Diagram A
3