Dimensions; The Installation Space; Product Clearances - Cafe CCP06BP Serie Manual Del Proprietário

Installation Instructions
BEVERAGE CENTER DIMENSIONS
(86.6-89.1 cm)
with leveling legs

THE INSTALLATION SPACE

10" (25.4 cm)
34-1/2" - 35"
Max.
(87.63 - 88.9 cm)
24" (61.0 cm)

PRODUCT CLEARANCES

When installed in a corner:
the 90° door swing and to allow racks to slide out.
side for a full 115° door swing.
13" Minimum
to Wall
115°
49-1000491 Rev. 3
(60.3 cm)
Locate
Outlet in
Grey Area
24" (61.0 cm)
90° Door Swing
90°
4" Minimum
to Wall
(59.5 cm)
REMOVE PACKAGING
NOTE: The toekick and door handle (some models)
are included in the packaging which covers the top
of the unit. A wrench for the handle installation is
included in the accessory bag located inside the
beverage center.
• Remove tape and glue residue from surfaces before
turning on the beverage center. Rub a small amount
of liquid dish soap over the adhesive with your
fingers. Wipe with warm water and dry.
NOTE: Do not use sharp instruments, rubbing
alcohol, flammable fluids, or abrasive cleaners to
remove tape or glue. These products can damage
the surface of your beverage center. For more
• Dispose of/recycle all packaging materials.
WARNING
Small objects are a choke hazard
for children. Remove and discard any parts not
used.
CLEAN BEFORE USING
After you remove all of the packaging materials, clean
the inside of the beverage center before using it. See
(119.4 cm)
11