Connect To Power; Complete Installation - Cafe CCP06BP Serie Manual Del Proprietário

Installation Instructions
INSTALLING THE BEVERAGE CENTER (Cont.)
METHOD 1
UNDERCOUNTER INSTALLATION
Level the Beverage Center
Adjustment of the leveling legs under the beverage
center may be necessary for a proper fit in the cabinet
opening. Tilt the unit to adjust the height of the four
leveling legs.
Attach the Anti-tip Brackets
1. Pry hole covers from the top of the beverage center to
reveal the holes used to install the anti-tip brackets.
2. Remove the anti-tip brackets and screws from the
accessory bag.
3. If installing to adjacent cabinets, use Screw A (Qty
4), fasten an anti-tip bracket to each side of the top
of the cabinet.
Left Side
4. If installing to
countertop, use
Screw A (Qty 2),
to attach bracket
on hinge side.
Install Toe Kick
1. Using Screw B (Qty 4), attach the toe kick brackets
to each side of the bottom of the cabinet as shown
in the picture.
Bracket
Left Side
2. Install the toe kick. Use Screw B or Screw E
depending on the color of your toe kick.
Screw
49-1000491 Rev. 3
Right Side
Screw
holes for
countertop
attachment
Bracket
Right Side

CONNECT TO POWER

WARNING ELECTRICAL SHOCK
HAZARD
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the
power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or
electrical shock.
COMPLETE INSTALLATION - Installing to
Adjacent Cabinets
1. Remove cover.
2. Slide the beverage center under the counter.
3. Install beverage center to cabinetry using Screw C
(Qty 3).
Handle Side
4. Reinstall cover.
COMPLETE INSTALLATION - Installing to
Countertop
1. Slide the beverage center under the counter.
2. Install wine center to countertop using Screw C
(Qty 2).
Screws
Hinge Side
15