Temperature Setback - Moehlenhoff AR 4070SF2 N Manual De Instrucciones

Temperature setback

Adjustable setback (2 K to 6 K)
For the reduced operation mode, the temperature
difference in the Basis Wireless is pre-programmed
to 2 Kelvin, and can be adjusted from 2 to 6 K in 0.1
K steps using the Wireless Inspector. This modifica-
tion ill then apply to the entire Wireless Basis.
If the energy saving mode (temperature setup)
is activated in the COOLING mode, the desired
temperature is raised. Energy is saved.
Control response of the AR 4070KF2E
Comfort KF2E
Thermostat performance in reduced operation mode
The desired minimum floor temperature (pos. 1-6)
will not be affected for the duration of the setback
phase. If only the external sensor is used (ext.), the
desired temperature from the dial will be adjusted
(lowered) by the value pre-programmed in the Basis
Wireless.
Thermostat performance in Cooling mode:
The desired minimum floor temperature (pos. 1-6)
will not be affected for the duration of the setback
phase. If only the external sensor is used (ext.), the
desired temperature from the dial will be adjusted
(raised) by the value pre-programmed in the Basis
Wireless.
D
GB
F
IT
ESP
NL
RUS
27