Installation Of A Cheesemelter To A Range; Model Gircm36 - 36" Ranges - Garland G Serie Manual De Instalación Y Operación

INSTALLATION Continued

Installation Of A Cheesemelter To A Range

NOTE: The back of the range must be easily accessible .
Model GIRCM36 – 36" Ranges
DETAIL
I
Figure 1 – With area detail defined for 36 inch range .
1 . Remove screws from back of oven (on both sides of
range) as shown:
REMOVE
2 SCREWS
(BOTH SIDES)
Part # 4526027 (01/07/09)
36" RANGE
DETAIL I
2 . Install the left and right support brackets (part # 4523226
and 4523227) by re-inserting the 2 screws removed in
step 1 and one additional screw (on both sides of the
range) .
INSERTED
SCREWS
3 . Slide the cheesemelter down into the support brackets
installed in step 2, see figure 1 .
4 . Once the cheesemelter is in place, fasten it to the unit on
both sides of the range with the provided #14B x 5/8 hex
washer head tapping screws .
PROVIDED
#14B x 5/8 HEX
WASHER HEAD
TAPPING SCREWS
DETAIL I
DETAIL I
Page 9