Connect To A Bluetooth Device - Maxell MXSB-252BT Manual De Instrucciones

Connections

Connect to a Bluetooth Device

You can listen to music from a Bluetooth-enabled
device via this player.
Pair the Bluetooth-enabled devices
The first time you connect your device to this
player, you need to pair your device to this player.
Note:
- The operational range between
this player and a Bluetooth device is
approximately 8m (26 ft).
- Before you connect a Bluetooth
device to this unit, familiarize
yourself with the Bluetooth
capabilities of the device.
- Compatibility with all Bluetooth
devices is not guaranteed.
- Any obstacle between this unit and
a Bluetooth device can reduce the
operational range.
- Keep this player away from any
other electronic device that may
cause interference.
1. Turn on the Bluetooth function on your
device.
2. Press the "BT" button on the touch panel
or remote control. The Bluetooth LED will
begin to flash slowly. The Sound Bar is
now in "search" mode.
3. Device name "MXSB-252BT" will appear
on your device's pair ing list.
4. Select " MXSB-252BT " from the list on your
device.
5. Your device will automatically pair with
Soundbar. If the pairing is successful, the
Bluetooth LED on the Sound Bar will stay
ON solid (for 5 seconds) and your device
will show "connected" or "paired".
6. To disconnect the connection, turn off
the Bluetooth function on your device or
switch the Soundbar input to another
source.
Tip to connect to a second device:
- If a connection already exists, press and
hold "PAIR" button on the remote control
or on top of the speaker for 3 seconds.
This will reactivate the pairing mode and
the current connection will be interrupted.
(Blue LED will flash rapidly on Sound Bar)
A second device can now be paired with
the Sound Bar (see pairing instructions).
- If there is no other Bluetooth device paired
with this speaker in two minutes, the speaker
will recover the previous connection.
- The speaker will also be disconnected
when your device is moved beyond
the operational range.
- If you want to reconnect your device
to this speaker system, place it within the
operational range.
- If the device is moved beyond the
operational range, when it is brought
back, please check to see that the
device is still connected with the speaker.
- If they are connected, the Bluetooth LED
will be ON (solid blue).
- If the connection is lost, Bluetooth LED will
flash slowly (search mode). Follow the
previous instructions to pair your device
to the speaker system again.
Listen to music from Bluetooth device
If the connected Bluetooth device

supports the Advanced Audio Distribution
Profile (A2DP), you can listen to the music
stored on the device through the Soundbar.
If the device also supports Audio Video

Remote Control Profile(AVRCP) profile,
you can use the speaker's remote control
to play music stored on the device.
1. Pair your device with the player.
2. Start to play music via your device
(if it supports A2DP)
3. Use the supplied remote control to
control playback (if it supports AVRCP)
- To pause/resume play,
press the
EN-10
button.